Target Raid Groups/Pools Of Each Function - Fujitsu ETERNUS DX500 S4/DX600 S4 Design Manual

A. Function Specification List
Target Pool for Each Function/Volume List

Target RAID Groups/Pools of Each Function

Action
Components
Max. ETERNUS
number DX500 S4/
DX500 S3
ETERNUS
DX600 S4/
DX600 S3
Create
Delete
Rename
Expand capacity
Migration
Logical Device Expan-
sion (LDE)
Format (All area)
Format (Unformatted
area)
Modify threshold
Eco-mode setup
Switch controlling CM
Allocate REC Buffer
Key management server
linkage
¡: Possible ´: Impossible - : N/A
*1: Only ETERNUS SF Storage Cruiser can perform operations on FTRP and FTSP.
*2: The maximum total number of TPPs and FTSPs.
*3: The Deduplication/Compression function can be enabled for a maximum of four TPPs.
*4: The Deduplication/Compression function can be enabled for a maximum of eight TPPs.
*5: If an SDPV is created, an SDP is automatically created.
*6: If all of the SDPVs are deleted, SDPs are automatically deleted.
*7: When a volume exists in a pool, the pool cannot be deleted.
*8: If an FTRP is deleted, the FTSP, which is included in the FTRP, is also deleted. The FTRP needs to be deleted
to delete the FTSP.
*9: This operation is possible in units of parent pools (FTRPs).
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)
RAID group REC Disk Buffer
Standard, SDV, —
WSV
264 Up to two can
be specified per
REC Buffer
528
¡ ¡
¡ ¡
¡ ¡
´
¡ (by LDE)
´
¡
´
¡
´
¡
´ ´
´ ´
´
¡
¡ ¡
´
¡
¡ ¡
211
Copyright 2019 FUJITSU LIMITED
SDP TPP
SDPV TPV
1 256 (*2) (*3)
1 256 (*2) (*4)
— (*5)
¡
— (*6)
¡ (*7)
´
¡
¡ (by adding ¡ (by adding
an SDPV) a RAID group)
´ ´
´
¡
´
¡
´
¡
¡ ¡
´
¡
¡ ¡
´ ´
¡ ¡
FTRP (*1) FTSP (*1)
FTSP FTV
60 256 (*2)
64 256 (*2)
¡ ¡
— (*8)
¡ (*7) (*8)
¡ ¡
△ (by adding ¡ (by adding a
a child pool)
RAID group)
´
¡
´ ´
¡ — (*9)
— (*9)
¡
— (*9)
¡
´
¡
—
¡
´ ´
¡ ¡
P3AM-7722-25ENZ0