Fujitsu ETERNUS DX500 S4/DX600 S4 Design Manual page 86

2. Basic Functions
Operation Management/Device Monitoring
●
Host Sense
The ETERNUS DX returns host senses (sense codes) to notify specific status to the server. Detailed information
such as error contents can be obtained from the sense code.
Note that the ETERNUS DX cannot check whether the event log is successfully sent to the syslog server. Even
•
if a communication error occurs between the ETERNUS DX and the syslog server, event logs are not sent
again. When using the syslog function (enabling the syslog function) for the first time, confirm that the
syslog server has successfully received the event log of the relevant operation.
• Using the ETERNUS Multipath Driver to monitor the storage system by host senses is recommended.
Sense codes that cannot be detected in a single configuration can also be reported.
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)
86
Copyright 2019 FUJITSU LIMITED
P3AM-7722-25ENZ0