Fujitsu ETERNUS DX500 S4/DX600 S4 Design Manual page 11

Preface
Fujitsu would like to thank you for purchasing the FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS
DX500 S3/DX600 S3 (hereinafter collectively referred to as ETERNUS DX).
The ETERNUS DX is designed to be connected to Fujitsu servers (Fujitsu SPARC Servers, PRIMEQUEST, PRIMERGY,
and other servers) or non-Fujitsu servers.
This manual provides the system design information for the ETERNUS DX storage systems.
This manual is intended for use of the ETERNUS DX in regions other than Japan.
This manual applies to the latest controller firmware version.
Twenty-Fifth Edition
April 2019
11
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AM-7722-25ENZ0