Figure 95 An Iscsi Connection For A Remote Copy Between Eternus Dx/Af Storage Systems (When Lines Are Used) - Fujitsu ETERNUS DX500 S4/DX600 S4 Design Manual

4. Connection Configuration
Remote Connections
■
iSCSI
Data transfer is performed between multiple ETERNUS DX/AF storage systems by using the host interface. Direct
connections to a WAN are possible.
Host interfaces with two different maximum transfer rates (10Gbit/s and 1Gbit/s) are available.
Figure 95 An iSCSI Connection for a Remote Copy between ETERNUS DX/AF Storage Systems (When Lines Are
Used)
ETERNUS DX/AF
Copy source
The IPsec function is not supported for iSCSI interfaces.
Select a LAN switch with the IPsec function to use the IPsec function to perform a remote copy.
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)
WAN (IP line)
iSCSI-RA
Switch
Copyright 2019 FUJITSU LIMITED
iSCSI-RA
Switch
151
ETERNUS DX/AF
Copy destination
P3AM-7722-25ENZ0