Checking The Eternus Dx Storage Systems' Connection Status - Fujitsu ETERNUS DX Configuration Manual

Chapter 9 Checking the Connected Devices
9.3

Checking the ETERNUS DX Storage Systems' Connection Status

9.3 Checking the ETERNUS DX Storage Systems' Connection Sta-
tus
The following items can be set and displayed in the "ETERNUS Multipath Manager" main window when
"ETERNUS Multipath Driver" is used.
• ETERNUS DX storage systems' connection status
Connected LUNs
•
Path status
•
Path restoration or release
•
These describe ETERNUS DX storage systems' connection status and the checking of paths.
1
Start up ETERNUS DX storage systems (assuming that LUNs are already set up), and check that it is
"Ready" before starting up the server.
2
When the server is Ready, start up Multipath Manager.
3
The main window will appear.
The status of the ETERNUS DX storage systems connected to the server (connection status, path status)
can be checked.
For details on "ETERNUS Multipath Manager" operations, refer to the manual provided with the "ETERNUS
Multipath Driver".
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows
Copyright 2020 FUJITSU LIMITED
27
®
P3AM-3442-18ENZ0