Toro Greensmaster eTriFlex 3360 Service Manual page 289

Preparing the Reel for Grinding (continued)
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev A
Basics (part no. 09168SL) found on the Service Reference Set available from
your Authorized Toro Distributor.
Relief grind the reel blades to the minimum blade land width if the reel blade land
width exceeds the service limit. Spin grind the reel to establish the specified
blade land width or to restore the reel's cylindrical shape.
Note: Always adjust the cutting unit after grinding the reel and/or bedknife; refer
to the Cutting Unit Operator's Manual. To extend the cutting unit performance
by allowing the reel and the bedknife to hold their edge longer, an additional
adjustment may be required after the first few minutes of operation as the reel
and bedknife conform to each other.
Page 7–21 DPA Cutting Units: Service and Repairs