Removing and Installing the 12V System Battery (Model 04580) (continued)
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev A
Be careful when removing the battery cables and ensure that you do
not damage the terminal posts or cable connectors.
1. Remove the right side cover.
2. Remove the battery cover.
3. Disconnect the ground (-) cable from the battery terminal, then disconnect
the positive (+) cable from the battery terminal.
4. Remove the lock nuts, carriage bolts, and the battery clamp.
5. Install the battery in reverse order.
6. After you make the connections, apply battery terminal protector Toro Part
No. 107-0392 or a light layer of grease to the battery terminals and cable
connectors to reduce corrosion; refer to
IMPORTANT
Special Tools (page
Page 5–117
2–13).
Electrical System: Service and Repairs