Adjusting the Brake Cable (continued)
Chassis: Adjustments
5. Use the 3/8 inch square drive hole in the right side upper brake arm to fully
extend the brake actuator.
6. Install the extension spring and adjust the eye bolt until the extension spring
is 11.4 cm (4.5 inch) inside the spring hooks. Tighten the eye bolt hex nuts.
g283646
1.
Brake actuator
2.
Extension spring
Figure 100
3.
Eye bolt
4.
Hex nuts (2 each)
Page 6–6
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev A