Toro Greensmaster eTriFlex 3360 Service Manual page 253

Removing and Installing the Steering Gear Box (continued)
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev A
3. Remove the lock nut, cap screw (item 20) and washer from the center of
the rear engine frame mount.
4. Support the rear of the engine frame and remove the upper steering housing
from the machine frame.
5. Remove additional items from the upper steering housing as needed.
6. Install the upper steering housing in reverse order. Tighten the fasteners
securing the upper steering housing to the machine frame from 75 to 81
N·m (55 to 60 ft-lb).
7. Use a new steering motor gasket, orient the steering motor as previously
recorded (as shown), and install the steering motor.
Page 6–33 Chassis: Service and Repairs