Toro Greensmaster eTriFlex 3360 Service Manual page 124

Identifying the 48 VDC System Fuses and their Functions (continued)
Electrical System: Testing the Electrical Components
Two fuses are used to protect the 48 VDC standard (front) traction motors.
These are MIDI style fuses located in separate covered holders. The fuse holder
for SC5:Traction 1 (right) is located under the operator seat. The fuse holder for
SC6:Traction 2 (left) is located under the left side cover.
On machines with an engine/generator (model 04580), a single fuse is used
to protect the starter/generator. This is a BF1 style fuse located in a separate
covered holder under the operator seat .
g287324
(seat raised and left side cover removed)
1. 60A 70V fuse – SC5: Traction 1 (right) power bus
2. 60A 70V fuse – SC6: Traction 2 (left) power bus
3. 100A 58V fuse – T6: Starter/Generator power bus (model 04580)
The four 12 VDC batteries that make up the 48 VDC battery power supply are
protected by a 150A 80V Mega style fuse. The fuse is located in a separate
Figure 34
Page 5–26 Greensmaster® eTriFlex 3360 and 3370
19239SL Rev A