Elapsed Time Integrator With Limit Transgression And Overflow Supervision Teigapc; Identification; Application; Setting Guidelines - ABB RELION 650 Series Applications Manual

Section 12
Logic
12.12 Elapsed time integrator with limit transgression and
overflow supervision TEIGAPC
12.12.1

Identification

Function Description
Elapsed time integrator
12.12.2

Application

The function TEIGAPC is used for user-defined logics and it can also be used for different
purposes internally in the IED. An application example is the integration of elapsed time during
the measurement of neutral point voltage or neutral current at earth-fault conditions.
Settable time limits for warning and alarm are provided. The time limit for overflow indication
is fixed to 999999.9 seconds.
12.12.3

Setting guidelines

The settings
resolution of the settings depends on the level of the values defined.
A resolution of 10 ms can be achieved when the settings are defined within the range
1.00 second ≤ tAlarm ≤ 99 999.99 seconds
1.00 second ≤ tWarning ≤ 99 999.99 seconds.
If the values are above this range the resolution becomes lower
99 999.99 seconds ≤ tAlarm ≤ 999 999.9 seconds
99 999.99 seconds≤ tWarning ≤ 999 999.9 seconds
The limit for the overflow supervision is fixed at 999999.9 seconds.
12.13

Comparator for integer inputs - INTCOMP

12.13.1

Identification

Function description
Comparison of integer values
194
IEC 61850
identificatio
n
TEIGAPC
tAlarm and tWarning are user settable limits defined in seconds. The achievable
tAlarm and tWarning are independent settings, that is, there is no
Note that
tAlarm > tWarning .
check if
IEC 61850
identification
IEC 60617 ANSI/IEEE C37.2 device
identificatio number
n
- -
IEC 60617
identification
INTCOMP Int<=>
1MRK 504 158-UEN A
GUID-1913E066-37D1-4689-9178-5B3C8B029815 v3
GUID-B4B47167-C8DE-4496-AEF1-5F0FD1768A87 v2
GUID-2911D624-87D5-4427-BB2F-E0D1072394FA v2
GUID-5992B0F2-FC1B-4838-9BAB-2D2542BB264D v1
ANSI/IEEE C37.2
device number
Application manual