Danfoss VLT AQUA Drive FC 202 Design Manual page 43

Specifications Design Guide
Control card, USB serial communication
USB standard 1.1 (full speed)
USB plug USB type B device plug
NOTICE
Connection to PC is carried out via a standard host/device USB cable.
The USB connection is galvanically isolated from the supply voltage (PELV) and other high-voltage terminals.
The USB connection is not galvanically isolated from ground. Use only isolated laptop/PC as connection to the USB
connector on the drive or an isolated USB cable/converter.
7 7
MG22B102 Danfoss A/S © 05/2017 All rights reserved. 41