Buttons And Symbols - Atmos S 042 NPWT Operating Instructions Manual

3.2

Buttons and symbols

The ATMOS
®
touching the buttons displayed on the screen.
Operation: The buttons on the screen always indicate what will happen after pressing the re-
spective button.
Attention! Any touch of the screen will be signalised with a sound. However, such button sound
does not indicate that the selected button is activated.
Button
Int
Cont
120 3
20 3
mmHg Min.
12
S 042 NPWT is equipped with a touch screen. The whole operation is performed by
Name
On/off button
Start button
Stop button
Menu button
Plus button
Minus button
Intermit button
Continuous
button
Intermittent
menu
Save/Back
Up
Down
Close
When touching this button for two seconds the vacuum
unit can be switched on and off.
Starts therapy.
Stops therapy.
For calling up submenus.
For increasing the displayed values.
For decreasing the displayed values.
For activation of the intermittent vacuum treatment.
When activated it is framed green.
For activation of the continuous vacuum treatment.
When activated it is framed green.
Touch this button to access the intermittent menu. Here
you can set the intermittent parameters for optimisation
of therapy.
When activated it is framed green.
With this button you save the set value and go back one
menu level.
Attention! If you do not want to save the set values, wait
until the screen returns to the previous menu level.
This button is used to scroll upwards in menus.
This button is used to scroll downwards in menus.
This button is used to close the warning window and to
suppress the alert.
Function