Connection And Removal Of Shoulder Strap - Atmos S 042 NPWT Operating Instructions Manual

3.3.2

Connection and removal of shoulder strap

4
1
5
Snap link for attachment to the negative pressure unit

Snap link for attachment to the negative pressure unit

Snap link for attachment to the negative pressure unit

Strap closure for attachment to the bed

Strap closure for attachment to the bed

Attaching the shoulder strap
Attaching the negative pressure unit to patient's bed
Unlocking the negative pressure unit for removal
Depending on the negative pressure chosen, location and course of the hose, a secretion col-
umn in the hose can cause the negative pressure in the wound not to correspond to the selected
value. Therefore, always place the vacuum unit at the same level or lower than the patient.
14
3
• Take the snap link
loops on your negative pressure unit.
• Now hook the other snap link
loop on your negative pressure unit.
• To prepare attachment to a patient's bed hook the snap
link

• Now you only need to connect the strap ends
to each other, to attach the negative pressure unit to a
patient's bed.
• Press the unlocking device of the strap closure laterally
and keep it pressed.
• Now pull the two ends apart.
• To make it ready for shoulder attachment exchange the
snap link
2
and hook it to one of the attachment

instead of snap link to the device.

with the snap link .

to the second attachment

and
 