Technical Data - Atmos S 042 NPWT Operating Instructions Manual

9.0

Technical data

Voltage
Current consumption
Power consumption
Charger
DC voltage
Battery, built-in
Operating time
Pump
Flow
Negative pressure
Control of negative pressure
Display
Operating conditions
Data memory
Intermit mode
Earth leakage current
Environmental conditions for
transport and storage:
32
100 - 240 V~, 50/60 Hz
IEC socket IEC320 / type C 8
max. 1.5 A
max. 50 W
Manufacturer: GlobTek, Inc.
Model: GTM91099-6015-3.0-T2
12 V DC +/- 2 %, max. 5 A via cable,1.2 m length with plug 5.5
x 2.5 x 11 mm, alternatively via car cable from the cigarette
lighter
Lithium-ionic, 14.4 V nominal, 2250 mAh
Charging time approx. 2.0 h, at ambient temperatures of
20°C (temperatures >25°C increased charging period), auto-
matic switchover to trickle charging, operation up to 16 h at
80 mmHg with 0.4 l/min leakage, capacity indication on the
display
Continuous operation during mains operation
Diaphragm pump, 1 pump head
max. 4,5 l/min free flow (without bacterial filter, damper or
hoses)
max. 500 mmHg (pump performance at sea level), however
limited mechanically and by electronic control
Electronically controlled, max. 250 mmHg, min 20 mmHg in
steps of 5 mmHg, secretion canister must be connected for
precise vacuum control
Graphic display, colour, with background lighting, with adap-
tation to ambient lighting conditions and automatic switch
off (energy saving mode)
Continuous or intermittent, operation can be selected, si-
multaneously battery recharging and operating possible
Internal memory for therapy data: 4MB.
Period max. vacuum: Range between 3 min - 10 min
Period min. vacuum: Range between 3 min - 10 min
Setting range
min. vacuum: 20mmHg - 30mmHg*
max. vacuum: 40mmHg - 50mmHg*
*The set minimum vacuum value between high and low is
20 mmHg
Default: High: 3 min and 120mmHg / Low: 3 min and
20mmHg
max. 0.5 mA
-25...+70°C
5...93 % air humidity without condensation
at an air pressure of 700...1060 hPa