Type Plate - WAGNER EvoMotion 40-15 Original Operating Manual

VERSION 12/2015
OPERATING MANUAL
Safe handling of WAGNER spray devices
Mechanical sparks can form if the device comes into contact with metal.
In an explosive atmosphere:
Do not knock or push the device against steel or rusty iron.
Do not drop the device.
Use only tools that are made of a permitted material.
Surface spraying, electrostatics
Do not spray device parts using electrostatic equipment.
Cleaning
If there are deposits on the surfaces, the device may form electrostatic charges. Flames or
sparks can form during discharge.
Remove deposits from the surfaces to maintain conductivity.
Use only a damp cloth to clean the device.
National regulations
Ensure that the national explosion prevention rules and regulations are observed when
setting up the device.
Air in the pump fl uid
Flammable gas mixtures can form if air reaches the pump fl uid.
Prevent the pump from taking in air and running dry.
If air has been taken in, fi x the leak. Then, fi ll slowly and in a controlled manner until the
air has escaped.
Air in the pumped fl uid can be caused by damaged packings.
Avoid operating the pump with damaged packing.
Ensure that the separating fl uid tank is fi lled with suffi cient separating fl uid.
Periodically check that the pump is working smoothly, paying special attention to the
presence of air in the pumped fl uid.
Filling and emptying
Flammable gas mixtures can form in the fl uid section or product hoses if the pump must
be emptied for maintenance.
Empty and fi ll the device slowly and in a controlled manner.
Avoid potentially explosive atmosphere in the surroundings.
3.3

TYPE PLATE

1
2
Pumpentyp / Pump type
3
Max. Materialdruck / Fluid pressure
4
Übersetzungsverhältnis / Ratio
5
Fördermenge DH / Delivery DS
6
Max. Luftdruck / Air pressure
7
Max. Temp. Material / Fluid
8
Baujahr - Serie Nr. / Year of manufacture - Serial No.
9
Vor Gebrauch Betriebsanleitung beachten / Check manual before use!
ORDER NUMBER DOC2333558
J. WAGNER AG
CH-9450 ALTSTÄTTEN
MADE IN SWITZERLAND
1 Manufacturer and CE
Identifi cation
2 Pump type
II 2 G c IIB T3/T4 X
3 Maximum product pressure
4 Pump ratio
5 Flow rate per double stroke
6 Maximum air inlet pressure
7 Maximum product temperature
8 Model year - serial number
9 Read operating manual before use!
13