Table of Contents
Advertisement
VERSION 12/2015
OPERATING MANUAL
Only electrically conductive tanks may be used for cleaning and fl ushing agents.
The tanks must be grounded.
An explosive gas/air mixture forms in closed tanks.
Never spray into a closed tank when using solvents for fl ushing.
External cleaning
When cleaning the exterior of the device or its parts, also observe the following:
Disconnect the pneumatic supply line.
Use only moistened cloths and brushes. Never use abrasive agents or hard objects and
never spray cleaning agents with a gun. Cleaning the device must not damage it in any
way.
Ensure that no electric component is cleaned with or immersed into solvent.
4.2.5
HANDLING HAZARDOUS LIQUIDS, VARNISHES AND PAINTS
When preparing or working with lacquer and when cleaning the device, follow the
working instructions of the manufacturer of the lacquers, solvents and cleaning agents
being used.
Take the specifi ed protective measures. In particular, use personal protective equipment:
safety goggles, protective clothing and gloves, as well as respiratory protection and
skin protection cream if necessary.
Use a mask or breathing apparatus if necessary.
For suffi cient health and environmental safety: Operate the device in a spray booth or
on a spraying wall with the ventilation (extraction) switched on.
Wear suitable protective clothing when working with hot products.
4.2.6
TOUCHING HOT SURFACES
Only touch hot surfaces if you are wearing protective gloves.
When operating the device with a coating product with a temperature of > 43 °C;
109 °F: identify the unit with a warning label that says "Warning - Hot Surface".
- Instruction label
- Protection label
Note: Order the two stickers together.
ORDER NUMBER DOC2333558
Order no. 9998910
Order no. 9998911
18
Hide quick links:
Advertisement
Table of Contents
