Type Plate - WAGNER EvoMotion 20-30 Original Operating Manual

Operating manual Piston Pump EvoMotion 20-30
3 Identification
Electrostatic surface spraying
4 Do not spray device parts using electrostatic equipment.
Cleaning
If there are deposits on the surfaces, the device may form electrostatic charges. Flames or
sparks can form during discharge.
4 Remove deposits from the surfaces to maintain conductivity.
4 Use only a damp cloth to clean the device.
Air in the pump fluid
Ignitable gas mixtures can form if air enters the pump fluid.
4 Prevent the pump from taking in air and running dry.
4 If air has been taken in, fix the leak. Then, fill slowly and in a controlled manner until the
air has escaped.
Air in the pumped fluid can be caused by damaged packings.
4 Avoid operating the pump with damaged packing.
4 Ensure that the separating agent tank is filled with sufficient separating agent.
4 Periodically check that the pump is working smoothly, paying special attention to the
presence of air in the pumped fluid.
Filling and emptying
Ignitable gas mixtures can form in the fluid section or product hoses if the pump must be
emptied for maintenance and/or repair purposes.
4 Empty and fill the device slowly and in a controlled manner.
4 Avoid potentially explosive atmosphere in the surroundings.
3.3 TYPE PLATE
Wagner International AG
CH-9450 ALTSTÄTTEN
1
MADE IN SWITZERLAND
Pumpentyp / Pump type
2
Max. Materialdruck / Fluid pressure
3
Übersetzungsverhältnis / Ratio
4
Fördermenge DH / Delivery DS
5
Max. Luftdruck / Air pressure
6
Max. Temp. Material / Fluid
7
Baujahr - Serie Nr. / Year of manufacture - Serial No.
8
Vor Gebrauch Betriebsanleitung beachten / Check manual before use!
9
Example type plate
1 Manufacturer and CE identification
2 Pump type
3 Maximum product pressure
4 Pump ratio
5 Flow rate per double stroke
Order number 2333553 | Edition 09/2020
II 2 G Ex h IIB T3/T4 Gb X
6 Maximum air inlet pressure
7 Maximum product temperature
8 Model year - serial number
9 Read operating manual before use!
11