Table of Contents
Advertisement
Operating manual Pneumatic double diaphragm pump TOPFINISH DD10 Alu NiP
3 Identification
Cleaning
If there are deposits on the surfaces, the device may form electrostatic charges. Flames or
sparks can form during discharge.
4 Remove deposits from the surfaces to maintain conductivity.
4 Use only a damp cloth to clean the device.
Air in the pump fluid
Ignitable gas mixtures can form if air enters the pump fluid.
4 Prevent the pump from taking in air and running dry.
4 If air has been taken in, fix the leak. Then, fill slowly and in a controlled manner until the
air has escaped.
Air in the pumped liquid can be caused by damaged diaphragms.
4 Avoid operating the pump with damaged diaphragms.
4 Periodically check that the pump is working smoothly, paying special attention to the
presence of air in the pumped fluid.
Filling and emptying
Ignitable gas mixtures can form in the fluid section or product hoses if the pump must be
emptied for maintenance and/or repair purposes.
4 Empty and fill the device slowly and in a controlled manner.
4 Avoid potentially explosive atmosphere in the surroundings.
3.3 TYPE PLATE
1
Wagner International AG, CH-9450 Altstätten
2
max. Air Pressure
3
max. Fluid Pressure
4
Tamb °C/°F
5
Article No.
Year of manufacture - Serial No.
6
7
Check user manual before use!
8
Designed and assembled by WAGNER in Switzerland.
B_06916
Pos Designation
1
Manufacturer and CE identification
2
Max. air pressure
3
Max. product pressure
4
Permissible ambient temperature
5
Article number
6
Model year - serial number
7
Read the operating manual before use
8
Indication of origin
Order number DOC 2366672 | Edition 08/2020
II 2G Ex h IIB T4 Gb X
0.8MPa; 116 psi
0.8MPa; 116 psi
4-40/39-104
11
Advertisement
Table of Contents
