Electrical Connection; Diaphragm Rupture Sensor - ProMinent Sigma/ 2 Control S2Cb Operating Instructions Manual

15.7

Electrical connection

Electrical data S2Cb pump
15.8

Diaphragm rupture sensor

Contact (standard)
The electrical data do not relate to the motor, but the
pump, which is connected as a whole unit.
For the motor electrical data, use the motor data sheet
from our website www.prominent.com.
Identity code specification "power supply" - "U": 100 - 230 V ± 10%, 240 V
± 6%, 50/60 Hz
Data
Capacity
Max. starting current
Electrical data at 100 V
Data
Effective current
Switch on peak current, (for approx. 100
ms)
Electrical data at 230 V
Data
Effective current
Switch on peak current, (for approx. 100
ms)
* internal switchover
Fuses
Fuse Value
Fuse, internal 6.3 AT - (1.5 kA)
Only use the original fuses from ProMinent! It is not suffi‐
cient to use a fuse with the above fuse rating.
Contact loading, max.
at voltage Maximum current
30 V DC 1 A
The contact is an opener.
The contact is an potential-free.
Technical data
Value Unit
220 W
8.5 A
Value Unit
3.3 A
4 A
Value Unit
1.5 A
8 A
Order No.
732379
89