Remote Operation - ProMinent Sigma/ 2 Control S2Cb Operating Instructions Manual

Batch size
Priming key
Acknowledge errors
Continuous
display
2 s
1
Adjustment
Mode
Fig. 31: Operating options with a locked operating menu
10.2

Remote operation

„Batch" mode: The batch variable is the metering volume, which is
Only in
metered at an external pulse or pressing of key
[arrow keys] is not precise enough, use the stroke
If adjustment using the
adjustment dial for fine adjustment.
Other key functions:
Simultaneous pressing of the two
tion.
Error displays are acknowledged by brief pressing of the
Stop/start pump
Change directly changeable variables
2
Priming
2
Start batch (only in "Batch" mode)
Acknowledge errors
Check adjustable values
There is an option to control the pump remotely via a signal cable - refer to
your system documentation and to the "Electrical Installation" chapter.
The pump can also be remotely controlled via PROFIBUS
plementary instructions are available for this.
Or via an external CANopen bus. Supplementary instructions are available
for this.
[P/OK] .
[arrow keys] triggers the "Priming" func‐
[P/OK] key.
= security lock ("Lock menu")
1
= security lock ("Lock all")
2
® (option). Sup‐
Operation
69