Setting; Basic Principles For Setting Up The Control; Checking Adjustable Values / Error Messages - ProMinent Sigma/ 2 Control S2Cb Operating Instructions Manual

Setting

8 Setting

8.1 Basic Principles for Setting up the Control

Confirming an entry
Quitting a menu option without confirming
it
Jumping back to a continuous display
Changing adjustable variables
Confirming adjustable variables

8.2 Checking adjustable values / error messages

Continuous displays
42
Please read the overviews in the appendix, "Control
–
elements and key functions" and "Operating/setting
diagram" for supplementary information.
If no key is pressed for a 1 minute duration, the
–
pump returns to a continuous display.
= Setting option
= Adjustable
Continuous
display
[P/OK] key.
Briefly press the
The display simultaneously changes to the next selection, to the next
menu option or into a continuous display.
Press [ESC] .
You will jump back to the previous menu option or menu.
[ESC] key for 2 seconds.
Press and hold the
[UP] or [DOWN] .
Press the arrow keys
In this way the digit between the triangles is increased or reduced.
Select the digit position in a number using the key
[P/OK] key.
Press the
The display simultaneously changes to the next selection, to the next
menu option or into a continuous display.
Before you adjust the pump, you can check the actual settings of the
adjustable variables:
[i/>] ("i" for "Info"), if the pump is displaying a contin‐
1. Press the key
uous display (An "i" is visible at the top left).
ð Each press of the
or a plain text error message.
2. The continuous display values can be changed using the
[arrow keys] .
Settings Auxiliary freq.
Auxiliary freq.
Calibration
Dosing
Relay
Diaphragm break
2 s
[i/>] .
[i/>] key displays another continuous display
070 /min
2 s