Declaration Of Conformity For Machinery - ProMinent Sigma/ 2 Control S2Cb Operating Instructions Manual

Declaration of Conformity for Machinery

17 Declaration of Conformity for Machinery
Extract from the Declaration of Conformity
Designation of the product:
Product type:
Serial number:
Relevant EC directives:
Harmonised standards applied, in
particular:
Date:
92
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN PAR‐
LIAMENT AND OF THE COUNCIL, Appendix I, BASIC HEALTH AND
SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
D - 69123 Heidelberg, Germany,
n
hereby declare that the product specified in the following, complies with
the relevant basic health and safety requirements of the Directive, on the
basis of its functional concept and design and in the version distributed by
us.
Any modification to the product not approved by us will invalidate this dec‐
laration.
Metering pump, Sigma product range
S2Cb...
see nameplate on the device
Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive (2014/35/EU)
according to Appendix I, No. 1.5.1 of the Machinery Directive
EMC Directive (2014/30/EU)
EN ISO 12100
EN 809:1998 - A1:2009 + AC:2010
EN 61010-1:2010
EN 61000-6-2:2005 + AC:2005
EN 61000-6-4:2007 + AC:2011
20/04/2016
View the EC Declaration of Conformity at www.prominent.com.