Programmable Function Settings ("Settings" Menu ); Auxiliary Frequency" Function Settings (Aux Menu) - ProMinent Sigma/ 2 Control S2Cb Operating Instructions Manual

Setting
Error processing
Continuous

8.6 Programmable function settings ("Settings" menu )

8.6.1 "Auxiliary frequency" function settings (AUX menu)

Continuous
display
52
Under menu option
processing type
sage appears and the pump stops.
Main menu
Mode
Settings
Service
Information
Language
display
Setting menus are available in all operating modes in the menu "SET‐
TINGS" for the following programmable functions:
Auxiliary frequency (menu
n
Flow (menu
n
Calibration (
n
Metering (menu
n
Metering monitor (
n
metering monitor is connected)
Relay (menu
n
Analogue output (
n
analogue output is connected)
Diaphragm rupture (
n
if a diaphragm rupture indicator is connected)
System (menu
n
Main menu
Mode
Settings
Service
Information
Language
The programmable function
to an auxiliary stroke rate, which can be set in the
It can be activated via the "External control" terminal. If the auxiliary fre‐
quency is used, then the identifier "Aux" appears on the LCD screen.
This „auxiliary frequency" has priority over the stroke rate, which is speci‐
fied by the currently selected operating mode - see also the chapter "Func‐
tion description" - "Hierarchy of operating modes".
„Analog error" you can activate error processing for
„Curve" . For current signals below 3.8 mA, an error mes‐
Settings
Analog
Auxiliary freq.
Calibrate
Dosing
Relay
Extended
Curve type
Curve points
Analog error
End
„AUX" )
„FLOW" ) (only available if a dosing monitor is connected)
„CALIBRATION" menu)
„METERING" )
„METERING MONITOR" menu) (only available if a
„RELAY" ) (only available if a relay is fitted)
„ANALOGUE OUTPUT" menu) (only available if an
„DIAPHRAGM RUPTURE" menu) (only available
„SYSTEM" )
Settings
Batch
Auxiliary freq.
Calibrate
Dosing
Relay
„Auxiliary frequency" facilitates the switchover
Analog
Standard
Extended
End
Analog error
Off
On
Auxiliary freq.
0 70
„Auxiliary freq." menu.