Selecting The Operating Mode (Menu "Mode"); Operating Mode Settings (Menu "Settings") - ProMinent Sigma/ 2 Control S2Cb Operating Instructions Manual

Setting

8.4 Selecting the operating mode (Menu "Mode")

8.5 Operating mode settings (menu "Settings")

44
2 s
Continuous
display
„Mode" menu (depending on the identity code, some operating
In the
modes may not be present) the following operating modes can be
selected:
„Manual" : for manual operation
n
„Batch" : for batch operation
n
„Contact" : for contact operation
n
„Analog" : for current control
n
Main menu
Mode
Settings
Service
Information
Language
Continuous
display
Various settings can be adjusted in the
selected operating mode.
Setting menus are available in all operating modes for the following pro‐
grammable functions:
„Auxiliary frequency"
n
„Calibration"
n
„Metering"
n
„Diaphragm rupture"
n
„System"
n
See also "Programmable function settings".
1.
Menu
Mode
2.
Menu
Settings
Main menu
Mode
Settings
Service
Information
Language
Menu
Service
Menu
Information
Menu
Language
Mode
Manual
Batch
Contact
Analog
„Settings" menu dependent on the