Commissioning
6.1
General requirements
Before commissioning it must be checked that:
● The device has been installed and connected in accordance with the guidelines provided
● Device installed in hazardous location meets the requirements described in "Installation in
6.2
Commissioning
Note
Refer to [Programming the Transmitter] (Page 46) if needed.
1. Scroll down to [Install Sensor] and press <Right Arrow>.
2. Scroll down to [Install Complete]. Press the <Right Arrow> and select [Install]. Press
FUH1010 IP65 NEMA 4X Precision Volume
Operating Instructions, 01/2013, A5E32122003-AA
in chapter 4 "Installing/mounting (Page 31)" and chapter 5 "Connecting (Page 35)"
hazardous location (Page 13)"
<ENTER>.
6
73