Figure 5-4 Sensor Cable Connections - Siemens SITRANS FUH1010 Product Instruction Manual

Connecting
5.3 Sensor Wiring
4. Apply power.
5. Within 10 seconds of power-up the transmitter main display will become active and a
44
①
Transmitter Input Module
②
Transducer Cables Connected to
Transmitter
③
Cable Strain Relief Bracket
④
To CH-2 DN
Figure 5-4 Sensor Cable Connections
typical Siemens graphic will appear. The screen also identifies the software version of the
unit as shown below.
⑤
To CH-2 UP
⑥
To CH-1 DN
⑦
To CH-1 UP
⑧
Channel 2
⑨
Channel 1
FUH1010 IP65 NEMA 4X Precision Volume
Operating Instructions, 01/2013, A5E32122003-AA