10. Disassemble the spacer bar and the unmounted frame. Use the bar as a straight edge
FUH1010 IP65 NEMA 4X Precision Volume
Operating Instructions, 01/2013, A5E32122003-AA
①
Sensor 1
②
Pipe
③
Dot
④
Sensor 2
and, with one edge against the mounted frames tapered roller center and the other
crossing the dot you drew, draw a line crossing the dot (see "B" above). Set the bar
aside.
①
Trim material from inner edge if necessary
②
Mylar Spacing Guide
③
8cm (3-inch) Overlapping Edge
Figure 5-14
Wrapping the Mylar Spacing Guide around the pipe (End View)
5.6 Sensor Installation
⑤
Sensor Edge Line
⑥
Spacer Bar
⑦
Dot
⑧
Line
⑨
Mylar Spacing Guide
Connecting
61