Wiring Temperature Sensor To Transmitter - Siemens SITRANS FUH1010 Product Instruction Manual

7. Plug input power plug into connector J10 and secure using two captive connector
8. Replace access cover. Make sure Keypad Enable switch is in the "Enable" position (see
5.2.2

Wiring Temperature Sensor to Transmitter

Wiring Temperature Sensor to the Analog Input ModuleSensor
Hazard Voltage
Contact with exposed wiring will lead to fire, electric shock, or serious personal injury.
Set transmitter and instrumentation power to OFF when inserting or removing the Analog
Input Module, or when making connections to TB1, TB2, TB3 and TB4.
1. Disconnect power to the transmitter.
2. Open the transmitter top cover by releasing the cover latch.
FUH1010 IP65 NEMA 4X Precision Volume
Operating Instructions, 01/2013, A5E32122003-AA
mounting screws.
below).
①
Keypad Enable Switch
DANGER
Connecting
5.2 Transmitter Wiring
39