Connecting
5.2 Transmitter Wiring
3. Loosen the captive thumbscrew securing the Access Cover and remove Access Cover.
4. Using a flat-blade screwdriver, remove four captive screws securing the I/O board.
①
Access Cover Screw
②
Transmitter
③
Fuse
Figure 5-2
Analog Input Module Access
40
Remove board and set it aside.
④
Latch
⑤
Access to Analog Input Module
FUH1010 IP65 NEMA 4X Precision Volume
Operating Instructions, 01/2013, A5E32122003-AA