Beckhoff EL6601 Documentation page 125

Fig. 150: Check "Allow users to establish a remote desktop connection"
• Open the list of remote desktop users via the button Select remote users... and add additional users if
required
• Confirm with OK.
Fig. 151: Adding remote desktop users
Configuration at the service PC
For a remote desktop connection with the TwinCAT master PC via the EL6601 the network address of the
service PC has to be set according to the IP number range of the TwinCAT master PC subnet.
• Connect the Ethernet port of the service PC with the EL6601 via a CAT-5 (1:1) cable
• In the Control Panel of the Service-PC check the Ethernet network adapter, via which the EtherCAT
system is operated:
Network Connections [Properties] -> Local Area Connection (Ethernet LAN adapter), [Properties]->
Internet Protocol (TCP/IP) [Properties]
EL6601, EL6614 Version: 4.2
Application samples
125