Beckhoff EL6601 Documentation page 115

• The EL6601 should appear in the system configuration being in OP mode (see Online [} 73] tab
EtherCAT Status Machine)
Fig. 135: EL6601 in the configuration
• Connect the network printer with the EL6601 via a CAT-5 (1:1) cable
• In the Control Panel of the controller IPC, check the network adapter via which the EtherCAT system is
operated:
Network Connections [Properties] -> Local Area Connection (TwinCAT LAN adapter), [Properties]->
Internet Protocol (TCP/IP) [Properties]
Fig. 136: Context Menu Network Environment -> "Properties"
EL6601, EL6614 Version: 4.2
Application samples
115