Beckhoff EL6601 Documentation page 112

Commissioning
• "Multicast Configuration": ditto.
Process data:
• "VarId": If activated, the variable ID can be modified online
Subscriber, variable
Fig. 133: Subscriber variable settings
Settings:
• "Variable ID": Only permits NWVs with a certain ID for this subscriber. Can be changed dynamically via
PLC where appropriate.
• "Ignore Data Type Hash": Hash calculation is currently not supported
Process data:
• "Quality": See explanatory notes above.
• "CycleIndex": This index is incremented with each successful transfer, IF this is done by the opposite
side, i.e. the publisher. If the publisher is an EL66x, the user must increment CycleIdx there.
• "VarData": Transferred data.
112 Version: 4.2 EL6601, EL6614