Transport, Packaging, Storage; Safety During Transport; Symbols On Packaging; Unpacking - Elektron MULTISPOT MI-100control Operating Manual

Resistance welder MULTISPOT MI-100control

Transport, packaging, storage

3 Transport, packaging, storage
3.1

Safety during transport

Inexpert transport
3.2

Symbols on packaging

Fig. 7: Top
Fig. 8: Do not stack
3.3

Unpacking

1. Do not remove packaging until immediately before installation.
During unpacking, do not use pointed tools.
2. Keep the original pallet (Fig. 9) in case of any further transport needs (return of goods,
further transport).
3. Recycle packing materials.
What to do with packing materials
22
CAUTION! Improper transport may cause damage to property!
Improper transport may cause damage to property.
Therefore:
When you unload packing units and move them across your premises, proceed with
care. Consider symbols and information on packaging.
Be sure to transport equipment as described hereinafter. (
CAUTION! Improper waste disposal may cause environmental hazards!
Packing materials are valuable raw materials. In many cases, they can be recycled,
i. e. used again for packaging or in some other way or they can be further processed or
treated in some way.
Therefore:
Be sure to dispose of packing materials in sustainable manner and / or according to
local laws and regulations.
Observe local waste management legislation. In case of doubt, contact a
specialised company.
Top
The arrows point towards the 'roof' of the packing unit. This
side up. The arrows must always point up; otherwise the
contents of the packing unit could be damaged.
Do not stack
Fragile goods. Do not stack; otherwise the contents of the
packing unit could be damaged.
see "3.5".)