Moving Equipment To The Site - Elektron MULTISPOT MI-100control Operating Manual

Resistance welder MULTISPOT MI-100control
Transport, packaging, storage
3.5.2

Moving equipment to the site

Fig. 10: Warning sign on balancer
There is a danger of tilting
There is a danger the equipment rolls away because the wheels must not be blocked due to the
tipping and toppling hazard.
24
CAUTION! Tipping and toppling may cause damage to property!
This equipment's centre of gravity is relatively high. In the event the wheels jam and / or
block (due to an obstacle or transverse pull, for instance), there is a danger the
equipment tips over.
Therefore:
Move this equipment always using the handles.
Keep potential obstacles out of the work area.
Securely stow cables and wires.
CAUTION! Equipment rolling away may cause damage to property!
The wheels of the equipment must not be blocked because this would cause a tipping
and toppling hazard. On the other side, though, this detail causes and increases the
danger the equipment rolls away.
Therefore:
Be sure to operate this equipment only on a flat and even floor.
Proceed with care when moving this equipment.
When moving around, always grip equipment by the handle
provided for that purpose.