Service Menu Settings; Enter Order Data; Concluding An Order - Elektron MULTISPOT MI-100control Operating Manual

Resistance welder MULTISPOT MI-100control
Operation
6.7.1 Service menu settings (page 1)
6.7.1.1

Enter order data

Fig. 76: Categories of information
6.7.1.2

Concluding an order

Fig. 77: Concluding an order
58
Press service button on the control panel - once.
This will call up the "Service" menu (page 1).
Enter the order data under menu item "Enter order data":
Use the control knob to select "Enter order data". Press to
confirm.
Vehicle number
User ID
Vehicle licence number
Type of vehicle
Order number
If the control does not detect activities over 60 mins., the data
must be either 75 confirmed or modified.
Menu item "Quit order" is for concluding an order.
Use the control knob to select "Quit order". Press to confirm.
As soon as "Yes" has been pressed, all welding data of the
order are stored and can be read and / or printed with the
program.