Resistance Welder MULTISPOT MI-100-3
Transport, packaging, storage
3
Transport, packaging, storage
3.1 Safety during transport
Inexpert transport
CAUTION ! Improper transport may cause damage to property.
Improper transport may cause damage to property. Therefore:
−
−
3.2 Symbols on packaging
Fig. 5: Top
Fig. 6: Do not stack
3.3 Unpacking
1.
Do not remove packaging until immediately before installation. During unpacking, do not use
pointed tools.
2.
Keep the original pallet (Fig. 7) in case of any further transport needs (return of goods, further
transport).
Recycle packing materials.
3.
What to do with packing materials
CAUTION ! Improper waste disposal may cause environmental hazards.
Packing materials are valuable raw materials. In many cases, they can be recycled, i.e.
used again for packaging or in some other way or they can be further processed or treated
in some way. Therefore:
−
−
3.4 Acceptance after shipping
Check packing units immediately after delivery. Check for integrity, missing pieces and damage.
If you detect any external shipping damage, proceed as follows:
Do not accept delivery. Or accept under reserve.
Report damage on carrier's shipping papers or delivery ticket.
Initiate complaint procedure.
16
When you unload packing units and move them across your premises, proceed with
care. Consider symbols and information on packaging.
Be sure to transport equipment as described hereinafter. (
Top
The arrows point towards the 'roof' of the packing unit. This side up. The
arrows must always point up, otherwise the contents of the packing unit
could be damaged.
Do not stack
Fragile goods. Do not stack, otherwise the contents of the packing unit could
be damaged.
Be sure to dispose of packing materials in sustainable manner and/or according to
local laws and regulations.
Observe local waste management legislation. In case of doubt, contact a specialised
company.
See "3.5".)
Need help?
Do you have a question about the MULTISPOT MI-100-3 and is the answer not in the manual?