Honeywell 30 Series Configuration Manual page 99

Export CA Certificate
The camera uses HTTPS, a secure communication protocol that verifies the identities of
visited websites and servers and encrypts data exchanged between the client and the server.
When you log in to the camera's web client for the first time, some browsers may display a
warning that the connection is not private/secure. To access the web client, you must install a
Honeywell-signed security certificate.
1. Click Export to save the root certificate (ca.crt) on your local computer.
2. Go to the directory where you saved the certificate and double-click the certificate. The
Certificate window opens.
3. In the Certificate window, on the General tab, click Install Certificate to open the
Certificate Import Wizard.
4. Click Next to continue.
5. Click Place all certificates in the following store, click Browse, click Trusted Root
Certification Authorities, and then click OK.
6. Click Next, and then click Finish to close the Certificate Import Wizard. A confirmation
dialog box appears with the message "The import was successful."
7. Click OK, and then click OK to close the Certificate window. And now your browser will not
display a warning that the connection is not private/secure.
Update daylight saving time rules
Follow the steps below to update daylight saving time rules:
1. Click Browse... next to Update daylight saving time rules.
2. Select the XML file to update.
3. Click Upload.
Update custom language file
Click Browse... and select your own custom language file to upload.
Upload configuration file
Follow the steps below to upload a configuration file:
1. Enter the password for uploading the configuration file. The password must be the same
with the password of the configuration file you set for exporting, or the uploading will be
failed. For example, if you set the password A for the configuration file A and you set the
password B for the configuration file B. When you want to upload the configuration file B,
you must use the password B.
2. Click Browse... to locate the configuration file and then click Upload to upload the
configuration file.
The model and firmware version of the device should be the same as the configuration file. If
you have set up a fixed IP or other special settings for your device, it is not suggested to
update a configuration file.
Configuring System Settings
85