Configuring Video And Audio Settings; Configuring Video Settings; Configuring Camera Settings - Honeywell equIP Series User Manual

2MP/4MP Low Light WDR IP Camera User Guide

4 Configuring Video and Audio Settings

This chapters contains the following sections:
Configuring Video Settings, page 14
•
Configuring Audio Settings, page 24
•

Configuring Video Settings

This section describes how to configure camera properties (picture, exposure, lighting
compensation, white balance, day and night, IR light, and defog) and video streaming
properties (format, resolution, frame rate, bit rate, and I-frame interval).

Configuring Camera Settings

You can configure camera properties on the Setup  Camera Setup  Properties page.
Profile
In the Profile list, select the camera profile that you want to configure settings for: Normal,
Day, or Night.
Picture
In the Picture area, select a picture style from the Style list:
Soft, Standard, or Vivid.
To adjust the image brightness, contrast, saturation,
sharpness, or gamma settings, drag the slider left or right or
click the – and + signs to make fine adjustments.
Brightness
Contrast
Saturation
Sharpness
Keep in mind that increasing sharpness in a moving image will
create more noise, resulting in a larger bit stream and saved
file size.
Gamma Adjusts the amount of gamma correction applied to
the image. Use fine adjustments to accent darker areas of the
image.
You can also change the image orientation:
To reverse the image, set Mirror to ON.
•
14
Adjusts the black level of the image.
Adjusts the white level of the image.
Adjusts the intensity of the image colors.
Adjusts the edge sharpness of image elements.