Figure 3-13 1R (One Regional) Display Mode - Honeywell 30 Series Configuration Manual

1R (One Regional) Display Mode
The 1R mode provides access to one image section within the hemisphere. You can zoom in
or out (using the mouse wheel or PTZ panel) or travel to other areas in the hemisphere using
mouse clicks and drags. A single click on a particular object can bring the object to the center
of your view window. Click and hold down the left mouse button, and you can drag the view in
all directions.

Figure 3-13 1R (One Regional) Display mode

1P2R (One Panoramic and Two Regional) Display Mode
The 1P2R mode provides access to two regional views and the reference to their relative
positions on a panoramic view. This display mode is available only when you select the Wall
mount type, see the Mount type section in
The operations of the 1P2R display mode is similar to the operations of the 1O3R, see
operations of the 1P3R display mode is similar
valid bookmark self-reference.
1O3R (One Original and Three Regional) Display Mode on page 16.
2P (Two Panoramic View) Display mode
Similar to 1P, the 2P display mode provides simultaneous access to both the left and right
sections of a hemisphere. Both panoramic views are corrected into a more viewable dewarped
image. You can use a mouse click and drag to quickly scroll horizontally through the
surveillance area.
General Settings
to the operations of the 1O3R, see
on page 16.
Logging In and Viewing Live Video
on page 20.
Error! Not a
The
15