Figure 6-13 Add Server - Honeywell 30 Series Configuration Manual

Performance Series IP Camera Software Configuration Guide

Figure 6-13 Add Server

Server type - Email
Select to send the media files via email when a trigger is activated.
•
Server name: Enter a name for the server setting.
•
Sender email address: Enter the email address of the sender.
•
Recipient email address: Enter the email address of the recipient.
•
Server address: Enter the domain name or IP address of the email server.
•
User name: Enter the user name of the email account if necessary.
•
Password: Enter the password of the email account if necessary.
•
Server port: The default mail server port is set to 25. You can also manually set another
port.
•
If your SMTP server requires a secure connection (SSL), select This server requires a
secure connection (SSL).
•
To verify if the email settings are correctly configured, click Test. The result will be shown
in a pop-up window. If successful, you will also receive an email indicating the result.
Click Save server to enable the settings.
After you configure the first event server, the new event server will be automatically display on
the Server list. If you wish to add other server options, click Add server.
Server type - HTTP
Select to send the media files to an HTTP server when a trigger is activated.
66