Configuring Audio Detection; Figure 6-7 Audio Detection - Honeywell 30 Series Configuration Manual

Performance Series IP Camera Software Configuration Guide

Configuring Audio Detection

Go to Setup Video Analytics  Audio Detection.
Note
Only HC30WF5R1 supports this function.
Audio detection, along with video motion detection, is applicable in the following scenarios:
•
Detection of activities not covered by camera view, e.g., a loud input by gun shots or
breaking a door/ window.
•
A usually noisy environment, such as a factory, suddenly becomes quiet due to a
breakdown of machines.
•
A PTZ camera can be directed to turn to a preset point by the occurrence of audio events.
•
Dark environments where video motion detection may not function well.

Figure 6-7 Audio Detection

The blue circles indicate where the audio alarms can be triggered when exceeding or falling
below the preset threshold.
Perform the following steps to configure Audio detection:
1. Once the Audio detection window is opened, the current sound input will be interactively
indicated by a fluctuating yellow wave diagram.
2. Drag the Alarm level slider to a preferred location on the left slide bar.
3. Check Enable audio detection and click Save.
60