Content Management; Searching And Viewing The Records; Search Results; Figure 7-5 Search - Honeywell 30 Series Configuration Manual

Performance Series IP Camera Software Configuration Guide
For example, if you enter "7 days", the recorded files will be stored on the SD card for 7 days.
Click Save to enable your settings.

Content Management

Go to Setup Storage Setup Content Management.
This section describes how to manage the content of recorded videos on the camera. Here
you can search and view the records and view the searched results.

Searching and Viewing the Records

This tab allows the user to set up search criteria for recorded data. If you do not select any
criteria and click Search, all recorded data will be listed in the Search Results tab.

Figure 7-5 Search

•
Trigger Type: Select one or more trigger types.
•
Media Type: Select a media type (Video clip, snapshot or text).
•
Time: Manually enter the time range you want to search for contents created at a specific
point in time.
Click Search and the recorded data corresponding to the search criteria will be listed in
Search Results tab.

Search Results

The following is an example of search results. To sort the search results, click each column
header.
74