Recording Settings; Adding A Recording Setting; Figure 7-8 Recording Settings - Honeywell 30 Series Configuration Manual

Performance Series IP Camera Software Configuration Guide
•
Lock/Unlock: Select the checkbox in front of a desired search result, then click this
button. The selected items will become Locked, which will not be deleted during cyclic
recording. You can click again to unlock the selections.
•
Remove: Select the desired search results, then click this button to delete the files.

Recording Settings

Go to Setup Storage Setup Recording Settings.
This section describes how to configure the recording settings for the camera.

Figure 7-8 Recording Settings

SD Test: Insert the SD card and click here to test.
Format your SD card via the camera's web console when using it
Note for the first time. For more information, see
73.

Adding a Recording Setting

Click Add to open the recording setting window. On this page, you can define the adaptive
recording, recording source, recording schedule, and recording capacity. A total of 2 recording
settings can be configured.
76
SD Card Status on page