People Detection; Figure 6-5 People Detection - Honeywell 30 Series Configuration Manual

Performance Series IP Camera Software Configuration Guide
1. Click New to add a new intrusion detection window.
2. In the Window Name text box, enter a name for the intrusion detection window. To delete
a window, click the
3. Draw a detection area by clicking four corner points on the target area. You can change
the shape of the detection area by dragging the corner points.
4. Click Save to enable the settings.
5. Select Enable motion detection to enable this function.

People Detection

The People Detection detects and traces people motions in customized windows. If a people
motion is detected, a flashing red window will frame the head of the people and follow the
motion of the people.

Figure 6-5 People Detection

To enable people detection:
1. Click New to add a new people detection window.
2. In the Window Name text box, enter a name for the people detection window. To delete a
window, click
3. Draw a detection area by clicking four corner points on the target area. You can change
the shape of the detection area by dragging the corner points.
4. Click Save to enable the settings.
5. Select Enable motion detection to enable this function.
58
mark on the right of the window name.
on the right of the window name.