Figure 4-2 Video Orientation - Honeywell 30 Series Configuration Manual

Performance Series IP Camera Software Configuration Guide
The power line frequency is changed, you must disconnect and
Note reconnect the power cord of the camera in order for the new
setting to take effect.
Video orientation:
•
Flip: vertically reflect the display of the live video;
•
Mirror: horizontally reflect the display of the live video.
•
Select both Flip and Mirror if the camera is installed upside-down (e.g., on the ceiling) to
correct the image orientation.
•
Rotate: Rotate the video by 90 degrees or 270 degrees. The rotation here indicates
clockwise rotation. Rotation can be applied with flip, mirror, and physical lens rotation
settings to adapt to different mounting locations, such as a corridor.

Figure 4-2 Video Orientation

Original Flip
The flip/mirror/rotate operation will clear the video settings,
Note privacy mask settings, exposure window, motion settings, preset
position and viewing window.
Day/Night Settings
Switch to B/W in night mode: Check to enable the camera to automatically switch to
Black/White during night mode.
Mode:
•
Auto mode (The Day/Night Exposure Profile will not be available if Auto mode is selected)
The camera automatically removes the filter by judging the level of ambient light.
Note
Select auto mode will disable profile of exposure settings.
•
Day mode
22
Original Mirror
Rotate 90
degrees
Original
clockwise
( )