Configuring Maintenance Settings; Upgrading Firmware; Figure 8-2 Maintenance - Honeywell 30 Series Configuration Manual

Keep current date and time: Select this option to preserve the current date and time of the
camera. The camera's internal real-time clock maintains the date and time even when the
power of the system is turned off.
Synchronize with computer time: Select this option to synchronize the date and time of the
camera with the local computer. The read-only date and time of the PC is displayed as
updated.
Manual: The administrator can enter the date and time manually. The date and time format
are [yyyy/mm/dd] and [hh:mm:ss].
Automatic: The Network Time Protocol is a protocol which synchronizes computer clocks by
periodically querying an NTP Server.
•
NTP server: Assign the IP address or domain name of the time-server. Leaving the text box
blank connects the camera to the default time servers. The precondition is that the
camera must have the access to the Internet.
•
Update interval: Select to update the time using the NTP server on an hourly, daily, weekly,
or monthly basis.

Configuring Maintenance Settings

Go to Setup System Setup Maintenance.
This chapter describes how to restore the camera to factory default, upgrade firmware version,
etc.

Figure 8-2 Maintenance

Upgrading Firmware

On this page, you can upgrade the firmware of the camera. It takes a few minutes to complete
the process.
Configuring System Settings
81