IP Camera Web Client
Video Analytics
60
Table 4-7
White Balance Settings (cont'd)
Option
MWB (Manual Mode)
AWC Push (Auto White
Balance Control Mode)
Your camera can be configured to detect camera sabotage and motion within a scene via
the Video Analytics view (see
detection threshold settings for blur, blinding and scene changes.
Figure 4-12
Video Analytics Tab
Each setting has three threshold levels: high (80%), medium (50%) and low (30%). When
these thresholds are exceeded, camera sabotage or motion is detected, and alarm
messages appear above the video display and alarm signals are sent to DVRs/NVRs (see
Figure
4-14).
Description
Manual white balance mode. Set the Red and Blue gains
from 0–255.
Automatically adjust the white balance to your specific
environment. When selected, the white balance is locked.
Note
This setting is recommended for situations in which
the light conditions are constant, so that the
specified color temperature does not change.
Figure
4-12). Use the Video Analytics tab to set the tamper