Thread Tension Solenoid Test(Sol Test) - SunStar SPS/E-BH6100 User Manual

2) Thread tension solenoid test(Sol Test)

①
Select " 2" with UP and Down key at the initial test screen and
press ENTER key.
②
Screen is changed to thread tension solenoid test.
③ Change the thread tension value by pressing ◀ (+) and ▶ (-) key.
(ex.: 0030)
④
Thread tension solenoid is operated when you press
key.
⑤ Solenoid On / Off is repeated whenever you press
⑥ When the READY(
moves to the original point and the initial test screen pops up.
•If the duty value is small, the thread tension solenoid cannot be functioning. Please conduct test by
increasing the duty value.
Caution
key.
) key is pressed, testing comes to a
close. The machine automatically
OR
↓
↓
↓
↓
↓
65