Step Motor Test(Jog X, Y, Z Test) - SunStar SPS/E-BH6100 User Manual

1) Step motor test(Jog X, Y, Z Test)

①
Use the UP or DOWN key and select '1' on the initial test
screen. Press ENTER.
② When a new screen appears, use the ◀ (+) and ▶ (-) keys to test
the X Step motor. Use the ▲ (Up) and ▼ (Down) keys to test
the Y Step motor. Use the knife On/Off key (
clamp Up/Down key (
③ When the ◀ (+) key is pressed, the X step motor test screen
appears.
④ When the ▶ (-) key is pressed, a new screen appears and the X
Step motor can be tested.
⑤ When the ▲ (Up) key is pressed, a new screen appears and the
Y Step motor can be tested.
⑥ When the ▼ (Down) key is pressed, a new screen appears and
the Y Step motor can be tested.
⑦
When the knife On/Off key (
appears and the PF Step motor can be tested (clamp up
direction).
⑧ When the clamp Up/Down key (
screen appears and the PF Step motor can be tested (clamp
down direction).
⑨ When the READY(
and the machine moves to the original position. The screen
switches to the initial testing screen.
When the X step motor is being tested by using the ◀ (+) and ▶ (-) keys, if the original point is passed, the
※
When the Y step motor is being tested by using the ▲ (Up) and ▼ (Down) keys, if the original point is passed, the
※
When the PF motor is being tested by using the
※
64
) and the
) to test the PF Step motor.
) is pressed, a new screen
) is pressed, a new
) key is pressed, the testing is over,
and keys, if the original point is passed, the
OR
↓
↓
↓
↓
↓
↓
↓
↓
is turned on.
is turned on.
is turned on.